BD-HP25H - Sharp DVD User Guide / Operation Manual. Page 2

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A (amp) fuse. Should the fuse need to be 

replaced, a BSI or ASTA approved BS 1362 fuse marked   or   and of the same rating as above, which is also indicated on the pin face of 

the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely 

event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type.

DANGER:  The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may 

occur.

To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your 

plug, proceed as follows:

 

- The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.

 

- The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.

Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.

Before replacing the plug cover make sure that:

 

- If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.

 

- The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of 

this product subject to the conditions listed below:-

1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover 

faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or 

repair other than by a Service Facility appointed by Sharp. 

2. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in 

the course of a business, trade or profession.

3. To benefi t from this guarantee, any fault which occurs must be notifi ed to Sharp, or its appointed Service 

Facility within one year from the date this product was purchased. Proof of purchase must be provided. 

4. The guarantee does not cover carriage costs. 

5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased. 

Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number 

given below. 

6. No person has any authority to vary the terms or conditions of this guarantee. 

7. This guarantee is offered as an additional benefi t to your statutory rights, and does not affect these rights in 

any way. 

If you have any difficulty operating this product, or would like information on other Sharp products, 

please telephone the Sharp Customer Information Centre on the number given below. 

Sharp Customer Information Centre - Telephone 0845 880 0421 

(or (01) 676 0648 if telephoning from Ireland)

0201