XL-UR27H - Sharp Audio User Guide / Operation Manual. Page 10

Read Sharp XL-UR27H User Guide / Operation Manual online

10
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Preparation for Use
System connections (continued) 
Demonstration mode
 
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
Remote control
Battery installation
 
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out. 
The first time the unit is plugged in, the unit will enter the 
demonstration mode. You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button on
the remote control. The unit will
enter the low power consumption
mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the
X-BASS/DEMO button on the remote control again.
 
Note:
When the power is on, the X-BASS/DEMO button can be used to 
select the extra bass mode.
External 
FM aerial
75 ohms 
coaxial cable
1
Open the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
 
When inserting or removing the batteries, push them towards the 
 battery terminals.
3
Close the cover.
Page of 40
Display

Click on the first or last page to see other XL-UR27H service manuals if exist.