Read Sharp XL-UR250H User Guide / Operation Manual online
E-7
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Preparation for Use
System connections (continued)
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and Earth (GND) terminals.
Position the AM loop aerial for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand or a wall with screws (not
supplied).
Position the AM loop aerial for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand or a wall with screws (not
supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
the plus (+) terminal.
Caution:
Speaker grilles are removable
< Assembling >
< Attaching to the wall >
Wall Screws (not supplied)
ANTENNA
FM
AM
GND
75 OHMS
XL-UR230H/XL-UR250H
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
impedance speakers can damage the unit.
XL-UR2110H
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
impedance speakers can damage the unit.
XL-UR230H/XL-UR250H/XL-UR2110H
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
be injured.
Make sure nothing comes into contact
with the speaker diaphragm when you
remove the speaker grilles.
with the speaker diaphragm when you
remove the speaker grilles.
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
RIGHT
SPEAKERS
LEFT
Black
Red
RATED SPEAKER IM
PEDANCE:
6 OHMS M
IN.
RIGHT
SPEAKERS
LEFT
Incorrect
Click on the first or last page to see other XL-UR250H service manuals if exist.