Read Sharp XL-UR250H (serv.man3) Service Manual online
XL-UR250H
2 – 1
CHAPTER 2.
ADJUSTMENTS
[1] CD Section
1. CD SECTION
• Adjustment
Since this CD system incorporates the following
automatic adjustment functions, readjustment is not
needed when replacing the pickup. Therefore,
different PWBs and pickups can be combined freely.
automatic adjustment functions, readjustment is not
needed when replacing the pickup. Therefore,
different PWBs and pickups can be combined freely.
Each time a disc is changed, these adjustments are
performed automatically. Therefore, playback of
each disc can be performed under optimum
conditions.
performed automatically. Therefore, playback of
each disc can be performed under optimum
conditions.
Items adjusted automatically
1) Offset adjustment (The offset voltage between the
head amplifier output and the VREF reference
voltage is compensated inside the IC.)
voltage is compensated inside the IC.)
* Focus offset adjustment
* Tracking offset adjustment
2) Tracking balance adjustment
3) Gain adjustment (The gain is compensated inside
the IC so that the loop gain at the gain crossover
frequency will be 0 dB.)
frequency will be 0 dB.)
* Focus gain adjustment
* Tracking gain adjustment
2. CD ERROR CODE DESCRIPTION
* 'CHECKING'
If Error is detected, 'CHECKING' will be displayed
instead of 'ER-CD**'. 'ER-CD**' display will only be
displayed when error had been detected for the 5
instead of 'ER-CD**'. 'ER-CD**' display will only be
displayed when error had been detected for the 5
th
times.
Error
Explanation
10*
CAM error. Can't detect CAM switch when CAM is moving.
11*
When it detect cam operation error during initialize process.
20*
TRAY error. Can't detect TRAY switch when TRAY is
moving.
moving.
21*
When it detect TRAY operation error during initialize
process.
process.
Click on the first or last page to see other XL-UR250H (serv.man3) service manuals if exist.