Read Sharp XL-UR2110H (serv.man4) Specification online
XL-UR2110H(BK)
2
IMPORTANT SERVICE NOTES (FOR U.K. ONLY)
Before returning the unit to the customer after completion of a repair or adjustment, it is necessary for the following
withstand voltage test to be applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
Before returning the unit to the customer after completion of a repair or adjustment, it is necessary for the following
withstand voltage test to be applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
WIRING OF PRIMARILY SUPPLY LEADS (FOR U.K. ONLY)
If any one of the bands shown in Fig. 1 is removed for some reason, be sure to replace it to the original position and
same appearance as before.
If any one of the bands shown in Fig. 1 is removed for some reason, be sure to replace it to the original position and
same appearance as before.
Set name
Set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgement
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
NG: The “NG” lamp lights and the buzzer sounds.
PROBE
AC
OUT
UNIT
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND OF CHASSIS
SCREW
TO GND OF CHASSIS
SCREW
WITHSTANDING
VOLTAGE TESTER
Nylon Band
LBND-1011AWZZ
AC Power
Supply Cord
Fig.1
Power Transformer
Brown
Blue
Click on the first or last page to see other XL-UR2110H (serv.man4) service manuals if exist.