XL-UR2110H (serv.man3) - Sharp Audio Specification (repair manual). Page 7

XL-UR2110H

2 – 1

• Adjustment

Since this CD system incorporates the following
automatic adjustment functions, readjustment is not
needed when replacing the pickup. Therefore,
different PWBs and pickups can be combined freely.

Each time a disc is changed, these adjustments are
performed automatically. Therefore, playback of
each disc can be performed under optimum
conditions.

1) Offset adjustment (The offset voltage between the

head amplifier output and the VREF reference
voltage is compensated inside the IC.)

* Focus offset adjustment

* Tracking offset adjustment

2) Tracking balance adjustment

3) Gain adjustment (The gain is compensated inside

the IC so that the loop gain at the gain crossover
frequency will be 0 dB.)

* Focus gain adjustment

* Tracking gain adjustment

* 'CHECKING'

If Error is detected, 'CHECKING' will be displayed
instead of 'ER-CD**'. 'ER-CD**' display will only be
displayed when error had been detected for the 5

th

times.

10*

CAM error. Can't detect CAM switch when CAM is moving. 

11*

When it detect cam operation error during initialize process.

20*

TRAY error. Can't detect TRAY switch when TRAY is 
moving.

21*

When it detect TRAY operation error during initialize 
process.