XL-UH240H - Sharp Audio User Guide / Operation Manual. Page 5

Read Sharp XL-UH240H User Guide / Operation Manual online

 
5
 
XL-UH240H
 
General Information
 
Precautions
  
General
  
Please ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 10 cm (4") of free space
along the sides, top and back of the equipment.
  
Do not place anything on top of the unit.
  
Do not expose the unit to moisture, to temperatures higher than
60
 
˚
 
C (140
 
˚
 
F) or to extremely low temperatures.
  
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
  
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
  
Attention should be drawn to the environmental aspects of battery
disposal.
  
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
  
The apparatus is designed for use in moderate climate.
 
Warning:
 
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.
 
  
Volume control
 
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid ex-
posure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
  
Use the unit on a firm, level surface free from 
vibration.
  
Keep the unit away from direct sunlight, 
strong magnetic fields, excessive dust, 
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.) 
which generate electrical noise.
  
In case of an electrical storm, unplug the 
unit for safety.
10 cm (4")
10 cm (4")
10 cm (4")
10 cm (4")
CD
USB
  
Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
  
The AC power plug is used as disconnect
device and shall always remain readily
operable.
  
Do not remove the outer cover, as this 
may result in electric shock. Refer inter-
nal service to your local SHARP service 
facility.
  
The ventilation should not be impeded by 
covering the ventilation openings with 
items, such as newspapers, tablecloths, 
curtains, etc.
Page of 44
Display

Click on the first or last page to see other XL-UH240H service manuals if exist.