XL-UH240H - Sharp Audio User Guide / Operation Manual. Page 39

XL-UH240H

 

Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
 

When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1

Set the unit to the stand-by mode and turn the power on again.

2

If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
 

1

Press the ON/STAND-BY button to enter the power stand-by
mode.

2

Whilst pressing down the   1 button and the   5 button, press
the ON/STAND-BY button until "CLEAR ALL" appears.

 
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.

The remote control does 
not operate.

Is the AC power lead of the unit 
plugged in?

Is the battery polarity correct?

Are the batteries dead?

Is the distance or angle 
incorrect?

Does the remote control sensor 
receive strong light?

The radio makes unusual 
noises continuously.

Is the unit placed near the TV or 
computer?

Is the FM aerial or AM loop aerial 
placed properly? Move the aerial 
away from the AC power lead if 
it's located nearby.