XL-UH220H - Sharp Audio User Guide / Operation Manual. Page 41

XL-UH220H

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.

AC 230 ~ 240V, 50 Hz

Power on: 100 W                                                   
Power stand-by: 0.6 W(*)

Width: 175 mm (6-3/4") 
Height: 240 mm (9-1/2") 
Depth: 315 mm (12-1/5")

5.3 kg (11.7 lbs.)

 ( * )This power consumption value is obtained when the 

demonstration mode is cancelled in the power stand-by mode. 
Refer to page 11 to cancel the demonstration mode.

RMS: 100 W (50 W + 50 W) (10% T.H.D.)
RMS: 76 W (38 W + 38 W) (0.9% T.H.D.)

Speakers: 6 ohms
Headphones: 16 - 50 ohms 
(recommended: 32 ohms)
Subwoofer pre-out (audio signal): 
200 mV/10 k ohms at 70 Hz

Video/Auxiliary (audio signal): 
500 mV/47 k ohms

Mass storage class

MP3/WMA (do not support DRM file)

FAT 16 or FAT 32

MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)

MP3 lD3 - tag only supports version 1.x
USB supports version 2.0

5-disc multi-play compact disc player

Non-contact, 3-beam semiconductor laser 
pickup

1-bit D/A converter

20 - 20,000 Hz

90 dB (1 kHz)

FM: 87.5 - 108 MHz

AM: 522 - 1,620 kHz

2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer

100 W

50 W

6 ohms

Width: 185 mm ( 7-1/4") 
Height: 260 mm (10-1/4") 
Depth: 205 mm (8-1/16")

2.4 kg (5.3 lbs.)/each