XL-S10H (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 8

Read Sharp XL-S10H (serv.man2) User Guide / Operation Manual online

03/10/28
XL-S10H_E_1.fm
8
TINSEA001SJZZ
XL-S10H
Pr
e
p
arati
on f
o
r Use
System connections
„
Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
z
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
z
Do not connect the attached FM aerial to an external FM aerial.
Otherwise, trouble may occur.
 
Installing the AM loop aerial:
„
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
 
Caution:
Placing the speaker system:
There is no distinction between the right and the left speakers.
Right speaker
Left speaker
AM loop aerial
FM aerial
Black
White line
Right speaker
Left speaker
Wall socket
(AC 230 - 240 V, 50 Hz)
Make sure to unplug the AC power lead before any connections.
< Assembling >
< Attaching to the wall >
 
Wall
 Screws (not supplied)
z
Do not let the bare speaker wires touch 
each other.
z
Use speakers with an impedance of 4 ohms or 
more, as lower impedance speakers can dam-
age the unit.
z
Do not mistake the right and the left channels. 
The right speaker is the one on the right side 
when you face the unit.
Incorrect
Page of 27
Display

Click on the first or last page to see other XL-S10H (serv.man2) service manuals if exist.