Read Sharp XL-MP35H (serv.man20) Service Manual online
– 35 –
XL-MP35H
14,55,89 VSS1,VSS2,
—
Power supply positive terminal
VSS3
17,54,90 VDD1,VDD2
—
Power supply negative terminal
VDD3
1,2
PORT0
Input/Output
• 8-bit I/O port • Specifiable 4 bit by 4 bit • Pull-up resistor can be ON/OFF 4 bit by 4 bit
95~100
P00~P07
• HOLD release input
• Port 0 interrupt input
3~10
PORT1
Input/Output
• 8-bit I/O port
P10~P17
• Specifiable bit by bit
• Pull-up resistor can be ON/OFF 1bit by 1bit
• Usable as
P10: SIO0 data output P11: SIO0 data input & bus input/output
P12: SIO0 clock input/output
• Pull-up resistor can be ON/OFF 1bit by 1bit
• Usable as
P10: SIO0 data output P11: SIO0 data input & bus input/output
P12: SIO0 clock input/output
P13: SIO1 data output
P14: SIO1 data input & bus input/output
P15: SIO1 clock input/output
P15: SIO1 clock input/output
P16: Timer 1PWML output
P17: Timer 1PWMH output/buzzer output
87*,88*
PORT3
Input/Output
• 6 -bit I/O port
32~35
P30~P35
• Specifiable 1bit by 1bit
• Pull-up resistor can be ON/OFF 1bit by 1bit
• Usable as
P30 - P33:INT4 input/HOLD release input/Timer 1 event input/Timer 0L capture input/Timer
0H capture input
P34 & P35:INT5 input/HOLD release input/Timer 1 event input/Timer 0L capture input/Timer
0H capture input
• Interrupt system
• Pull-up resistor can be ON/OFF 1bit by 1bit
• Usable as
P30 - P33:INT4 input/HOLD release input/Timer 1 event input/Timer 0L capture input/Timer
0H capture input
P34 & P35:INT5 input/HOLD release input/Timer 1 event input/Timer 0L capture input/Timer
0H capture input
• Interrupt system
26,27*
PORT7
Input/Output
• 4-bit I/O port
28,29
P70~P73
• Specifiable 1bit by 1bit
• Pull-up resistor can be ON/OFF 1bit by 1bit
• Usable as
P70:INT0 input/Hold release input/Timer 0L capture input/Watchdog timer output
P71:INT1 input/Hold release input/Timer 0H capture input
P72:INT2 input/Hold release input/Timer 0 event input/Timer 0L capture input
P73:INT3 input (with noise filter)/Timer 0 event input/Timer 0H capture input
A/D conversion input port: AN8 (P70), AN9 (P71)
• Interrupt system
• Pull-up resistor can be ON/OFF 1bit by 1bit
• Usable as
P70:INT0 input/Hold release input/Timer 0L capture input/Watchdog timer output
P71:INT1 input/Hold release input/Timer 0H capture input
P72:INT2 input/Hold release input/Timer 0 event input/Timer 0L capture input
P73:INT3 input (with noise filter)/Timer 0 event input/Timer 0H capture input
A/D conversion input port: AN8 (P70), AN9 (P71)
• Interrupt system
22*,25*
PORT8
Input/Output
• 8-bit I/O port
18~21
P80~P87
• 1-bit oriented input/output
23,24
• Usable as
A/D conversion input port: AN0 - AN7
Small signal detect input port: MICIN (P87)
A/D conversion input port: AN0 - AN7
Small signal detect input port: MICIN (P87)
Pin No.
Function
PORT Name
Input/Output
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
IC701 RH-iX0073SJZZ: System Microcomputer (IX0073SJ) (1/2)
INT0
INT1
INT2
INT3
INT1
INT2
INT3
Rise
Fall
Rise & Fall
H level
L level
INT0
INT1
INT2
INT3
INT1
INT2
INT3
Rise
Fall
Rise & Fall
H level
L level
Click on the first or last page to see other XL-MP35H (serv.man20) service manuals if exist.