Read Sharp XL-MP35H (serv.man2) User Guide / Operation Manual online
03/8/20
XL-MP35H(E)2.fm
20
XL-MP35H
TINSE0144SJZZ
T
a
pe Rec
o
rding
Recording on a cassette tape
Before recording:
"
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
"
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
"
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
the recorded signal (Variable Sound Monitor).
"
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
"
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
malfunctions.
!
Recording from a CD or MP3 disc
To perform programmed recording:
To stop recording:
Press the button.
The disc and tape will stop.
Press the button.
The disc and tape will stop.
To interrupt recording:
Press the
Press the
button.
"
Recording is paused, but disc playback will continue.
To resume recording, press the
( ) button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD" appears on the dis-
play.
When operating with the remote control, press the CD button.
play.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
5
Press the
button.
Recording will be paused.
6
Press the
( ) button to start re-
cording.
"
Playback of the disc will start in a few seconds after the tape
starts.
starts.
"
When the playback of the disc is finished or the end of the
tape is reached, the disc and the cassette will stop automat-
ically.
tape is reached, the disc and the cassette will stop automat-
ically.
1 Programme tracks (see page 16).
2 Press the
2 Press the
button.
3 Press the
( ) button.
Click on the first or last page to see other XL-MP35H (serv.man2) service manuals if exist.