XL-MP110E - Sharp Audio User Guide / Operation Manual. Page 34

 

03/12/17

XL-MP110EE 28-38.fm

 

XL-MP110E

  

 

When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.

 

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

  

 

 

  

Speaker with a 

built-in amplifier

  

The clock is not set to the 
correct time.

  

Did a power failure occur? Reset 
the clock. 

  

When a button is pressed, 
the unit does not respond.

  

Set the unit to the power stand-
by mode and then turn it back on.

  

If the unit still malfunctions, reset 
it. 

  

No sound is heard.

Is the volume level set to "0"?

Are the headphones connected?

Are the speaker wires discon-
nected?

Playback does not start.

Is the disc loaded upside down?

Playback stops in the mid-
dle or is not performed 
properly.

Does the disc satisfy the stan-
dards?

Is the disc distorted or 
scratched?

Playback sounds are 
skipped, or stopped in the 
middle of a track.

Is the unit located near excessive 
vibrations?

Is the disc very dirty?

Has condensation formed inside 
the unit?