Read Sharp XL-MP100H User Guide / Operation Manual online
31
XL-MP100H
04/1/28
XL-MP100H(E)UK3.fm
TINSEA015SJZZ
A
d
v
a
n
ced Fea
tures
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
!
To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
You can play back the same source only (the function cannot be
switched).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
Enhancing your system
!
Headphones
"
Before plugging in or unplugging the headphones, reduce the vol-
ume.
ume.
"
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
"
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
cally. Adjust the volume using the VOLUME control.
1
Set the sleep time (steps 1 - 2, page 30).
2
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 29 - 30).
(steps 4 - 6, pages 29 - 30).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback
start time
start time
5 minutes - 3 hours
8
Click on the first or last page to see other XL-MP100H service manuals if exist.