Read Sharp XL-MP100H User Guide / Operation Manual online
17
XL-MP100H
04/1/28
XL-MP100H(E)UK2.fm
TINSEA015SJZZ
CD
or MP3
disc Pla
y
bac
k
"
Programmed play
You can choose up to 20 selections for playback in the order you
like.
like.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 2 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 2 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
!
If you open the disc tray or enter the stand-by mode, the pro-
grammed sequence is automatically cancelled.
grammed sequence is automatically cancelled.
!
Even if you changed the function from CD to some other function,
the programmed selections will not be cleared.
the programmed selections will not be cleared.
!
During the programme operation, random play is not possible.
!
For MP3 discs, you can select the track number but cannot select
the folder by pressing the direct search button(s).
the folder by pressing the direct search button(s).
"
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
!
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
side from which signals are read. Do not mark this surface.
!
Keep your discs away from direct sunlight, heat, and excessive
moisture.
moisture.
!
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
1
Whilst in the stop mode, press the MEMORY (MEMORY/
SET) button to enter the programming save mode.
SET) button to enter the programming save mode.
2
Press the direct search buttons
on the remote control to select
the desired track.
on the remote control to select
the desired track.
Selected track number
You can also select a track by pressing the
or
button.
3
Press the MEMORY (MEMORY/
SET) button to save the track
number.
SET) button to save the track
number.
Playback order
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be
programmed.
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
by pressing the CLEAR button.
5
Press the (
) button to start playback.
NO
YES
Correct
Correct
5
Click on the first or last page to see other XL-MP100H service manuals if exist.