Read Sharp XL-HP605 (serv.man2) User Guide / Operation Manual online
Listening to a CD (CDs)
1
Press the CD button.
2
Press the 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
OPEN/CLOSE button to open the disc tray 1.
3
Place the CD on the disc tray 1, label side up.
4
Press the OPEN/CLOSE button to close the disc tray 1.
5
You can place discs on trays 2 - 5 by following steps 2 - 4.
6
Press the / button to start playback.
Listening to the radio
1
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
desired frequency band (FM or AM).
2
Press the TUNING (
or
) button to tune in to the desired
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the “ST” indicator.
Press the TUNER (BAND) button to display the “ST” indicator.
● “ ” will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
12 cm (5”)
8 cm (3”)
Listening to a cassette tape
1
Press the TAPE button.
2
Open the cassette door by pushing the area marked “
PUSH EJECT”.
PUSH EJECT”.
3
Load a cassette into the cassette compart-
ment with side A facing you.
ment with side A facing you.
4
Press the
button to choose one side or
both sides.
5
Press the / button to listen to side A, or the button
for side B.
for side B.
■
If trouble occurs
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
1. Set the unit to the stand-by mode and turn the power on
again.
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
by resetting it.
■
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the
button and the X-BASS/
DEMO button, press the
PRESET button until
“CLEAR AL” appears.
Caution:
■
Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual (page 32).
mance, refer to the operation manual (page 32).
XLHP605E_QG.pm
03.12.15, 2:57 PM
2
Display
