XL-HP600 - Sharp Audio User Guide / Operation Manual. Page 28

03/1/31

XL-HP600E(E)3.fm

XL-HP600E

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

! General

 

! CD player

! Tuner

 

! Cassette deck

" The clock is not set to the 

correct time.

" Did a power failure occur? Reset 

the clock. (Refer to page 13.)

" When a button is pressed, 

the unit does not respond.

" Set the unit to the power stand-

by mode and then turn it back on.

" If the unit still malfunctions, reset 

it. (Refer to page 29.)

" No sound is heard.

" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires discon-

nected?

" Playback does not start.

" Is the disc loaded upside down?

" Playback stops in the mid-

dle or is not performed 
properly.

" Does the disc satisfy the stan-

dards?

" Is the disc distorted or 

scratched?

" Playback sounds are 

skipped, or stopped in the 
middle of a track.

" Is the unit located near excessive 

vibrations?

" Is the disc very dirty?
" Has condensation formed inside 

the unit?

" Radio makes unusual 

noise consecutively.

" Is the unit placed near the TV or 

computer?

" Is the FM aerial or AM loop aerial 

placed properly? Move the aerial 
away from the AC power lead if 
it's located nearby.

" Cannot record.

" Is the erase-prevention tab re-

moved?

" Cannot record tracks with 

proper sound quality.

" Is it a normal tape? (You cannot 

record on a metal or CrO  tape.)

" Cannot erase completely.
" Sound skipping.

" Is there slack in the tape?
" Is the tape stretched?

" Cannot hear treble.

" Are the capstans, pinch rollers, 

or heads dirty?

" Sound fluctuation.
" Cannot remove the tape.

" If a power failure occurs during 

playback, the heads remain en-
gaged with the tape. Do not open 
the compartment with great 
force.