Read Sharp XL-HP600 User Guide / Operation Manual online
03/1/31
XL-HP600E(E)2.fm
11
XL-HP600E
Pre
p
aration
for Use
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
the plus (+) terminal.
Caution:
" Connect the speaker wires to the speakers first, then to the
" Connect the speaker wires to the speakers first, then to the
unit.
" Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
" Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the bass
" Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
" Do not stand or sit on the speakers. You may be injured.
Speaker grilles are removable:
! Connecting the AC power lead
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
Notes:
" The unit will start the tape initialisation when plugged in to the AC
" The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
the unit cannot be turned on. Wait until the process is finished.
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
! Demonstration mode
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
Incorrect
Incorrect
Make sure nothing comes into contact
with the speaker diaphragms when you
remove the speaker grilles.
with the speaker diaphragms when you
remove the speaker grilles.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
unit will enter the demonstration mode.
You will see words scroll.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
Click on the first or last page to see other XL-HP600 service manuals if exist.