XL-HP550 - Sharp Audio User Guide / Operation Manual. Page 11

02/8/7

XL-HP550E(E)2.fm

XL-HP550E

! Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.

Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:
Placing the aerial on the stereo system or near the AC power lead
may cause noise pickup. Place the aerial away from the stereo sys-
tem for better reception.

 
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.

! Speaker connection

Front speakers
Connect the black wire to the FRONT SPEAKERS (-) terminal, and
the red wire to the FRONT SPEAKERS (+) terminal.

Surround speakers
Connect the black wire to the SURROUND SPEAKERS (-) terminal,
and the grey wire to the SURROUND SPEAKERS (+) terminal.

Caution:
" Connect the speaker wires to the speakers first, then to the

" If you use other speakers with impedance lower than that speci-

fied, the unit may be damaged. Front speakers: 8 ohms  Sur-
round speakers: 16 ohms

" Do not mistake the right and the left channels. The right speaker

is the one on the right side when you face the unit.

" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the bass

reflex ducts.

" Do not stand or sit on the speakers. You may be injured.

< Assembling >

< Attaching to the wall >

 

Wall   Screws (not supplied)

External FM aerial