XL-HP434 - Sharp Audio User Guide / Operation Manual. Page 51

03/12/2

XL-HP434H(H)E4.fm

8

XL-HP434H

TINSZA007AWZZ

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.

"

 

"

"

 

"

 

"

 

"

AC 230 V, 50 Hz

Power on: 100 W

Power stand-by: 0.6 W (*)

Width: 185 mm (7-1/4") 
Height: 260 mm (10-1/4") 
Depth: 307 mm (12")

6.0 kg (13.2 lbs.)

 ( * )This power consumption value is obtained when the demonstra-

tion mode is cancelled in the power stand-by mode. Refer to 
page 9 to cancel the demonstration mode.

PMPO: 364 W

MPO: 182 W (91 W + 91 W) (DIN 45 324)

RMS: 100 W (50 W + 50 W) (DIN 45 324)

RMS: 76 W (38 W + 38 W) (DIN 45 500)

Speakers: 6 ohms

Headphones: 16 - 50 ohms 
(recommended: 32 ohms)

Subwoofer pre-output (audio signal): 
200 mV/10 k ohms at 70 Hz

Video/Auxiliary (audio signal): 
500 mV/47 k ohms

5-disc multi-play compact disc player

Non-contact, 3-beam semiconductor laser 
pickup

1-bit D/A converter

20 - 20,000 Hz

90 dB (1 kHz)

FM: 87.5 - 108.0 MHz

AM: 522 - 1,620 kHz

50 - 14,000 Hz (normal tape)

50 dB (recording/playback)

0.35 % (DIN 45 511)

2-way type speaker system

5 cm (2") tweeter

13 cm (5-1/8") woofer

100 W

50 W

6 ohms

Width: 165 mm (6-1/2") 
Height: 261 mm (10-1/4") 
Depth: 230 mm (9-1/16")

2.6 kg (5.7 lbs.)/each