XL-HP404 - Sharp Audio User Guide / Operation Manual. Page 31

03/10/9

XL-HP404E(E)3.fm

XL-HP404E

TINSEA004AWZZ

!

 

!

!

!

When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1

Set the unit to the stand-by mode and turn the power on again.

2

If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
 

!

1

Press the ON/STAND-BY button to enter the power stand-by
mode.

2

Whilst pressing down the 

 button and the X-BASS/DEMO but-

ton, press the 

 

 PRESET   button until "CLEAR AL"

appears.

 
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.

"

Cannot record.

"

Is the erase-prevention tab re-
moved?

"

Cannot record tracks with 
proper sound quality.

"

Is it a normal tape? (You cannot 
record on a metal or CrO  tape.)

"

Cannot erase completely.

"

Sound skipping.

"

Is there any slack?

"

Is the tape stretched?

"

Cannot hear treble.

"

Are the capstans, pinch rollers, 
or heads dirty?

"

Sound fluctuation.

"

Cannot remove the tape.

"

If a power failure occurs during 
playback, the heads remain en-
gaged with the tape. Do not open 
the compartment with great 
force.

"

The remote control does 
not operate.

"

Is the AC power lead of the unit 
plugged in?

"

Is the battery polarity correct?

"

Are the batteries dead?

"

Is the distance or angle incor-
rect?

"

Does the remote control sensor 
receive strong light?

"

The radio makes unusual 
noises continuously.

"

Is the unit placed near the TV or 
computer?

"

Is the FM aerial or AM loop aerial 
placed properly? Move the aerial 
away from the AC power lead if 
it's located nearby.

9