Read Sharp XL-HP404 User Guide / Operation Manual online
03/10/9
XL-HP404E(E)2.fm
13
XL-HP404E
TINSEA004AWZZ
Ba
sic Ope
ration
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Note:
The "CLOCK" or time will flash to confirm the time display when the
AC power supply is restored after a power failure or unplugging the
unit. If incorrect, readjust the clock as follows.
The "CLOCK" or time will flash to confirm the time display when the
AC power supply is restored after a power failure or unplugging the
unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flash-
ing, step 4 (for selecting the 24-hour or 12-hour display) will be
skipped.
Perform "Setting the clock" from step 1. If the time display is flash-
ing, step 4 (for selecting the 24-hour or 12-hour display) will be
skipped.
To change the 24-hour or 12-hour display:
Note:
The clock can also be set with the remote control.
The clock can also be set with the remote control.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
"CLOCK", and press the MEMORY/SET button.
4
Press the
or
button to select 24-hour or 12-hour dis-
play and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5
Press the
or
button to adjust the hour and then press
the MEMORY/SET button.
Press the
or
button once to advance the time by 1 hour.
Hold it down to advance continuously.
6
Press the
or
button to adjust the minutes and then
press the MEMORY/SET button.
Press the
or
button once to advance the time by 1
minute. Hold it down to change the time in 5-minute intervals.
1
Press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button until the current
time is displayed.
The time display will appear for about 10 seconds.
The time display will appear for about 10 seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 31 for details.]
memory (reset)" on page 31 for details.]
2
Perform "Setting the clock" from step 1.
3
Click on the first or last page to see other XL-HP404 service manuals if exist.