Read Sharp XL-HP404 (serv.man10) Service Manual online
XL-HP404E/HP404H
7 – 4
The HF waveform is normal and the time is displayed nor-
mally, but no sound is produced. Or the sound has drop-
outs.
mally, but no sound is produced. Or the sound has drop-
outs.
When a disc is loaded, start play operation.
The HF waveform is normal, but the TOC data cannot be read.
Check the PDO waveform. (Figure 6)
Check around pins 76~80 on IC1.
Figure 6
T
FDO
PDO2
PDO1
Stopped
CH1=500 mV
DC 10:1
CH3=1 V
DC 10:1
CH4=1 V
DC 10:1
500 ms/div
(500 ms/div)
NORM:20 kS/s
1
4
3
=Record Length=
Smoothing : ON
CH1 :
0.000 V
CH2 :
0.0 V
Main :
100 K
Zoom :
2 K
Mode : AUTO
Type : EDGE CH2
Delay :
Type : EDGE CH2
Delay :
0.0 ns
Hold off :
0.2 µs
CH3 :
0.00 V
CH4 :
0.00 V
BW : FULL
=Trigger=
=Filter=
=Offset=
CH1
v/DIV
500 mV
500 mV
1999/04/05 17:33:17
(5) Others.
Is pin 69 (C2F) on IC1 "L"?
No
There are too many error flags on a damaged disc which makes
error correction impossible.
error correction impossible.
Yes
1. When playing at normal speed.
Check the peripheral circuit at pin 39 (DOUT) on IC1 and the
waveform (Figure 7).
Check the peripheral circuit at pin 39 (DOUT) on IC1 and the
waveform (Figure 7).
Check again using a known good disc.
If OK, Check the unit.
Figure 7
T
T
DOUT
Stopped
CH1=2 V
DC 10:1
500 ns/div
1999/04/07 09:25:28
(500 ns/div)
NORM:200 MS/s
1
=Record Length=
Smoothing : ON
CH1 :
0.00 V
CH2 :
0.00 V
Main :
1 K
Zoom :
100
Mode : NORMAL
Type : EDGE CH1
Delay :
Type : EDGE CH1
Delay :
2.887 ms
Hold off :
0.2 µs
CH3 :
0.00 V
CH4 :
0.00 V
BW : FULL
=Trigger=
=Filter=
=Offset=
