Read Sharp XL-HF202PH (serv.man6) Service Manual online
XL-HF202PH/XL-HF302PH
2
– 1
CHAPTER 2. ADJUSTMENTS
[1] CD Section
Adjustment
Items adjusted automatically
2) Tracking balance adjustment
1)
3)
[2] Version Check
[Version Check Method]
1. During Audio In function, press button (main unit) then press and hold button (main unit) until
software version display appears.
software version display appears.
3. [Exiting Version Check]
3.1. While in Version display, press ON / STAND-BY button (main unit).
3.2.
Since this CD system incorporates the following
automatic adjustment functions, readjustment is not
needed when replacing the pickup. Therefore, different
PWBs and pickups can be combined freely.
automatic adjustment functions, readjustment is not
needed when replacing the pickup. Therefore, different
PWBs and pickups can be combined freely.
Offset adjustment (The offset voltage between the head
amplifier output and the VREF reference voltage is
compensated inside the IC)
* Focus offset adjustment
* Tracking offset adjustment
amplifier output and the VREF reference voltage is
compensated inside the IC)
* Focus offset adjustment
* Tracking offset adjustment
Gain adjustment (The gain is compensated inside the
IC so that the loop gain at the gain crossover frequency
will be 0 dB.)
* Focus gain adjustment
* Tracking gain adjustment
IC so that the loop gain at the gain crossover frequency
will be 0 dB.)
* Focus gain adjustment
* Tracking gain adjustment
Each time a disc is changed, these adjustments are
performed automatically. Therefore, playback of each
disc can be performed under optimum conditions.
performed automatically. Therefore, playback of each
disc can be performed under optimum conditions.
2. Software version displays as below.
For model XL-HF202PH: “ XL-HF202 Vxxx ”
Vxxx : Software version
For model XL-HF302PH: “ XL-HF302 Vxxx ”
“RESET” appears at display. The unit will be reset before go to stand-by mode (demo).
Click on the first or last page to see other XL-HF202PH (serv.man6) service manuals if exist.