Read Sharp XL-DAB227NH (serv.man2) User Guide / Operation Manual online
30
XL-DAB227NH
2008/July/30
XL-DAB227/257NH
XL-DAB257NH
Radio
Listening to the radio (continued)
Memorising a station
You can store 40 DAB/FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
To recall a memorised station
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
(Preset memory scan)
To erase entire preset memory
1
Tune to the desired DAB station on page 26 or FM station
on page 29.
on page 29.
2
Press the MEMORY button to enter the preset tuning
saving mode.
saving mode.
3
Within 20 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 20 seconds, press the MEMORY button to store that
station in memory.
station in memory.
If the “MEMORY” and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
memorised for that preset channel number will be erased.
Press the PRESET (
or ) button for less than 0.5 seconds to
select the desired station.
1
Press the PRESET (
or )
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
or ) button again when the desired
station is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the button, press the TUNER/DAB
button until “PRESET CLEAR” appears.
button until “PRESET CLEAR” appears.
Click on the first or last page to see other XL-DAB227NH (serv.man2) service manuals if exist.