XL-DAB20NH - Sharp Audio User Guide / Operation Manual. Page 10

Read Sharp XL-DAB20NH User Guide / Operation Manual online

XL-DAB10N 20H_001 UK.fm
9
Listening to the iPod (continued)
Simply remove the iPod from the iPod dock. It is safe to do
so even during playback.
Note:
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit. The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
iPod operation:
The operations described below depend on the generation
iPod you are using.
System on operation:
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function).
System off (stand-by) operation:
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to charging mode.
Notes:
If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
To return to watching video on iPod screen, press the
MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds
until “iPodDISP” appears. Repeat steps 2 and 3.
During iPod video playback, pressing the DISPLAY (TV
OUT) button will not toggle video out display between
iPod and TV.
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main
unit will automatically change to iPod function overriding
the previous function selected.
Caution:
Unplug all accessories for the iPod before inserting it into
the iPod dock.
■ iPod playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button on the remote control or
FUNCTION button on the main unit repeatedly to
select iPod function.
3
Insert iPod unit in iPod dock of main unit.
4
Press the  /  button to start playback.
■ To disconnect iPod
■ Navigating the iPod menus
1
Press the MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
2
Use the 
 or 
 button to select an item on the menu
and then press ENTER button.
XL-DAB10
■ Watching videos on a TV connected to 
iPod
1
Press the DISPLAY (TV OUT) button for more than 2
seconds.  “TV DISP” will appear on display.
2
Select the desired video from iPod unit to be played.
3
Press the ENTER button to start playback.
■ Various iPod functions
Function
Main 
unit
Remote 
control
Operation
Play
Press in the pause 
mode.
Pause
Press in the playback 
mode.
Track 
up/down
____ 
Press in the playback or 
pause mode. 
If you press the button 
in the pause mode, 
press the  /  button to 
start the desired track.
Fast 
forward/ 
reverse
____ 
Press and hold down in 
the playback mode.
Release the button to 
resume playback.
Display
____ 
iPod back light ON.
Press for more than 2 
seconds to toggle the 
video out display 
between iPod or TV.
Repeat
____ 
Press to toggle repeat 
mode.
Shuffle
____ 
Press and hold down to 
toggle shuffle mode.
iPod
Menu
____ 
Press to view the iPod 
menu during iPod 
function.
iPod
Enter
____ 
Press to confirm the 
selection.
iPod
Cursor
Up/
Down
____ 
Press to select the iPod 
menu.
Page of 28
Display

Click on the first or last page to see other XL-DAB20NH service manuals if exist.