XL-DAB151PHBK (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 2

Read Sharp XL-DAB151PHBK (serv.man2) User Guide / Operation Manual online

11/8/1
01_XLDAB151PH EN_UK.fm
1
Special Notes
NOTE FOR USERS IN THE U.K. AND IRELAND:
The mains lead of this product is fitted with plug
incorporating a 3A fuse. Should the fuse need to be
replaced, a BSI or ASTA approved BS 1362 fuse marked
 or 
 and of the same rating as above, which is also
indicated on the pin face of the plug must be used. 
Always refit the plug cover after replacing the fuse. Never
use the plug without the plug cover fitted. 
In the unlikely event of the socket outlet in your home not
being compatible with the plug supplied, cut-off the mains
plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the
cut-off plug destroyed immediately and disposed of in a
safe manner. 
Under no circumstances should the cut-off plug be
inserted elsewhere into a 13A socket outlet as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the
instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance
with the following code:
Blue    : Neutral
Brown : Live
As the colours of the wires in the mains lead of this product
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
● The wire which is coloured blue must be connected to
the plug terminal which is marked N or coloured black.
● The wire which is coloured brown must be connected to
the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is
connected to the earth terminal in your three pin plug.
Before replacing the plug cover, make sure that:
● If the new fitted plug contains a fuse, its value is the
same as that removed from the cut-off plug.
● The cord grip is clamped over the sheath of the mains
lead and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair,
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please visit our
web-site www. sharp.co.uk/ customersupport.
Customers without internet access may telephone 0845
880 0512 during office hours (or (01) 676 0648 if telephon-
ing from lreland).
Please note; all calls will be charged at local rate.
Certain replacement parts and accessories may be ob-
tained from our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
0121 766 5414
In the unlikely event of this equipment requiring repair
during the guarantee period, you will need to provide proof
of the date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at
the time of purchase.
Page of 28
Display

Click on the first or last page to see other XL-DAB151PHBK (serv.man2) service manuals if exist.