Read Sharp XL-70 User Guide / Operation Manual online
28
HOW TO USE THE BUILT-IN TIMER
■
Timer playback
TIMER
4,5,6
2,5,6
1
3
2
6
Turn the jog dial to set the minute at which to
start, and then press the MEMORY/SET but-
ton.
start, and then press the MEMORY/SET but-
ton.
●
The timer playback starting time, function, and
volume will be displayed, and then the unit will
enter the stand-by mode automatically.
volume will be displayed, and then the unit will
enter the stand-by mode automatically.
●
“
f
” will appear and the current time will be dis-
played.
7
When the preset time is reached, the volume
will increase gradually.
will increase gradually.
8
If you select CD or TAPE in the timer operation,
the unit will enter the stand-by mode after the
playback. If you select TUNER or AUX, it will
enter the stand-by mode one hour after the timer
playback starts.
the unit will enter the stand-by mode after the
playback. If you select TUNER or AUX, it will
enter the stand-by mode one hour after the timer
playback starts.
Caution:
●
Timer recording is not possible.
●
Recording operations are not possible during
timer playback.
timer playback.
To confirm the timer setting:
Press the CLOCK/TIMER/SLEEP button on the
main unit twice or press the TIMER button on the
remote control once.
main unit twice or press the TIMER button on the
remote control once.
●
The timer playback starting time, function, and
volume will be displayed.
volume will be displayed.
●
If you press the TIMER button on the remote
control whilst confirming the timer setting (whilst
“
control whilst confirming the timer setting (whilst
“
f
” is flashing), you can turn the timer playback
stand-by mode on or off.
To change the programmed contents:
After cancelling the timer mode, perform steps 1 -
6 above.
6 above.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power
on.
on.
Notes:
●
The previously programmed timer starting time
will be stored until it is reprogrammed.
will be stored until it is reprogrammed.
●
The timer cannot control the component con-
nected to the auxiliary input sockets.
nected to the auxiliary input sockets.
●
Before setting the timer, make sure that the clock
setting is correct. (Page 12)
setting is correct. (Page 12)
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button to select the de-
sired function, and then adjust the sound vol-
ume using the jog dial.
sired function, and then adjust the sound vol-
ume using the jog dial.
3
Press the CLOCK/TIMER/SLEEP button repeat-
edly until “
edly until “
f
” is displayed.
4
Within 6 seconds, press the MEMORY/SET but-
ton.
●
If more than 6 seconds have passed, start again
from step 3.
from step 3.
5
Turn the jog dial to set the hour at which to start,
and then press the MEMORY/SET button.
*60H/70H(SUK)28-32
00.1.5, 11:41 AM
28
Click on the first or last page to see other XL-70 service manuals if exist.