Read Sharp XL-60 User Guide / Operation Manual online
31
(Continued)
To head-
phones socket
■
Headphones
●
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
phones, make sure the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
●
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
RESETTING THE MICROCOMPUTER
1
3
3
2,3
AC INPUT
3
Reset the microcomputer under the following
conditions:
conditions:
●
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
and timer settings, and tuner and CD presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
2
Unplug the AC power lead from the AC INPUT
socket on this unit.
socket on this unit.
3
Whilst pressing down the MEMORY/SET but-
ton and the
ton and the
0
button, plug the AC power lead
into the AC INPUT socket on this unit.
Caution:
●
The operation explained above will erase all data
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
■
Internal care
●
Do not touch the laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetis-
er’s instructions carefully before use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetis-
er’s instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
a diluted soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or
other chemicals.
other chemicals.
MAINTENANCE
*60H/70H(SUK)28-32
00.1.5, 11:41 AM
31
Click on the first or last page to see other XL-60 service manuals if exist.