Read Sharp XL-560E User Guide / Operation Manual online
CASSETTE OPERATION
■
Cassette tape
●
For playback, use normal or low-noise tape for
the best sound. (Metal or CrO
the best sound. (Metal or CrO
2
tape is not rec-
ommended.)
For recording, use only normal tape.
For recording, use only normal tape.
●
Do not use C-120 tapes, tapes with large di-
ameter reels, or poor-quality tapes, as they
may cause malfunctions.
ameter reels, or poor-quality tapes, as they
may cause malfunctions.
●
Before loading a tape into the cassette com-
partment, tighten the slack with a pen or pencil.
partment, tighten the slack with a pen or pencil.
●
Cassettes have removable tabs which prevent
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.
■
Tape playback
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until "TAPE" ap-
pears in the display.
pears in the display.
●
Press the TAPE button on the remote control.
3
Open the cassette door by pushing the area
marked "
marked "
7
PUSH EJECT".
4
Load the cassette into the cassette compart-
ment.
ment.
5
Press the
0
button.
To stop playback:
Press the
■
button.
Fast forward/rewind:
To advance the tape, press the
■
button, then
press the
2
button. To rewind, press the
■
but-
ton, then press the
3
button.
Caution:
●
When removing the cassette tape, press the
■
button, and then open the cassette compart-
ment.
●
Before changing from one tape operation to
another, press the
another, press the
■
button.
●
If a power failure occurs during tape operation,
the tape head will remain engaged with the
tape and the cassette door will not open. In
this case, wait until power is restored.
the tape head will remain engaged with the
tape and the cassette door will not open. In
this case, wait until power is restored.
●
Even if the
0
/ CD
6
button is pressed during
tape playback, the unit will not enter the pause
mode.
The pause mode is only active during synchro-
nized operation of the cassette deck and CD.
In the normal cassette mode, use the
mode.
The pause mode is only active during synchro-
nized operation of the cassette deck and CD.
In the normal cassette mode, use the
■
button.
Side A (1)
Tab for side B (2)
Tab for side A (1)
1
2
5
1
5
2
4
3
XL-560E/XL-570E(SUK) TINSE0019SJZZ
11
Click on the first or last page to see other XL-560E service manuals if exist.