Read Sharp XL-530H User Guide / Operation Manual online
PREPARATION FOR USE
●
Unplug the AC power lead from the AC
socket before connecting or disconnecting
any component.
socket before connecting or disconnecting
any component.
■
Speaker connection
Connect each speaker wire to the SPEAKER ter-
minals as shown.
Use speakers with an impedance of 4 ohms or more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
minals as shown.
Use speakers with an impedance of 4 ohms or more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
●
Connect the wire with the white line to the minus
(
(
−
) terminal and the plain wire to the plus (+) ter-
minal.
Notes:
●
Do not mix the right channel and left channel wir-
ing when connecting the speakers to the unit.
ing when connecting the speakers to the unit.
●
Do not let the bare speaker wires touch each other
as this may damage the amplifier and/or speakers.
as this may damage the amplifier and/or speakers.
●
The speaker grille is not removable.
Caution:
●
The speakers included with the unit should only
be used with the XL-530H. Do not use them with
other models. Do not connect the XL-530H’s
speaker terminals to any speakers other than
those included with the unit.
be used with the XL-530H. Do not use them with
other models. Do not connect the XL-530H’s
speaker terminals to any speakers other than
those included with the unit.
●
Should the speakers included with this unit be-
come defective, they can be repaired by your local
service facility.
Please ensure that full model details are supplied
with the faulty speaker to your local service facility.
come defective, they can be repaired by your local
service facility.
Please ensure that full model details are supplied
with the faulty speaker to your local service facility.
■
Aerial connection
RATED SPEAKER IMPEDANCE:
4 OHMS MIN.
SPEAKERS
LEFT
RIGHT
2
1
3
Right speaker
Left speaker
ANTENNA
AM LOOP
FM
1
2
3
(1)
(2)
FM aerial
AM
loop
aerial
loop
aerial
Connect the aerial wire to the ANTENNA socket.
(1) FM aerial
Position the FM aerial wire in the direction where
the strongest signal can be received.
the strongest signal can be received.
(2) AM loop aerial
Position the AM loop aerial for optimum recep-
tion.
Place the AM loop aerial on a shelf, etc., or at-
tach it to a stand or wall with screws (not sup-
plied).
tion.
Place the AM loop aerial on a shelf, etc., or at-
tach it to a stand or wall with screws (not sup-
plied).
Notes:
●
Do not place the aerial on the main unit as it
may result in noise pickup from the internal
digital electronics.
Place the aerial away from the unit for better
reception.
may result in noise pickup from the internal
digital electronics.
Place the aerial away from the unit for better
reception.
●
If the AM loop aerial and the FM aerial wire
are placed near the AC power lead, interfer-
ence may result.
are placed near the AC power lead, interfer-
ence may result.
●
Do not connect the attached FM aerial to an
external FM aerial. Otherwise, trouble may
occur.
external FM aerial. Otherwise, trouble may
occur.
XL-530E(SUK) TINSE0017SJZZ
3
Click on the first or last page to see other XL-530H service manuals if exist.