XL-530H - Sharp Audio User Guide / Operation Manual. Page 11

■

●

For playback, use normal or low-noise tape for
the best sound. (Metal or CrO

2

 tape is not rec-

ommended.)
For recording, use only normal tape.

●

Do not use C-120 tapes, tapes with large di-
ameter reels, or poor-quality tapes, as they
may cause malfunctions.

●

Before loading a tape into the cassette com-
partment, tighten the slack with a pen or pencil.

●

Cassettes have removable tabs which prevent
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.

■

Press the ON/STAND-BY button to turn the
power on.

Press the FUNCTION button until "TP" ap-
pears in the display.

●

Press the TAPE button on the remote control.

Open the cassette door by pushing the area
marked "

7

 PUSH EJECT".

Load the cassette into the cassette compart-
ment.

Press the 

0

 button.

Press the 

■

 button.

To advance the tape, press the 

■

 button, then

press the 

2

 button. To rewind, press the 

■

 but-

ton, then press the 

3

    button.

●

When removing the cassette tape, press the

■

 button, and then open the cassette compart-

ment.

●

Before changing from one tape operation to
another, press the 

■

 button.

●

If a power failure occurs during tape operation,
the tape head will remain engaged with the
tape and the cassette door will not open. In
this case, wait until power is restored.

●

Even if the 

0

 button is pressed during tape

playback, the unit will not enter the pause
mode.

Side A (1)

Tab for side B (2)

Tab for side A (1)

XL-530E(SUK) TINSE0017SJZZ