Read Sharp XL-35 User Guide / Operation Manual online
02/9/11
XL35H_H_E1.fm
E-6
ENGLISH
XL-35H
8
7
6
5
4
3
2
1
Prep
aration f
o
r Us
e
!
Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
"
Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
cause noise pickup. Place the aerial away from the unit for better
reception.
"
Do not connect the attached FM aerial to an external FM aerial.
Otherwise, trouble may occur.
Otherwise, trouble may occur.
Installing the AM loop aerial:
!
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
black wire to the plus (+) terminal.
Caution:
"
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
impedance speakers can damage the unit.
"
Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
is the one on the right side when you face the unit.
Placing the speaker system:
There is no distinction between the right and the left speakers.
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
The speaker grilles are not removable.
!
Connecting the AC power lead
After checking all the connections, connect the AC power lead to the
AC power input socket, then plug the AC power lead of this unit into
the wall socket.
AC power input socket, then plug the AC power lead of this unit into
the wall socket.
Notes:
"
Unplug the unit if it is not to be used for a prolonged period of
time.
time.
"
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
malfunction or an accident may occur.
!
To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to the stand-by mode:
Press the ON/STAND-BY button again.
Press the ON/STAND-BY button again.
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
"
Do not let the bare speaker wires touch
each other.
each other.
Incorrect
Click on the first or last page to see other XL-35 service manuals if exist.