Read Sharp XL-30 (serv.man3) User Guide / Operation Manual online
1
Placing the system
(P. 8)
MICRO COMPONENT SYSTEM
Quick Guide XL-30H
20 cm (8")
10 cm (4")
10 cm (4")
10 cm (4")
3
1
Check the supplied accessories
(P. 3)
Remote control
×
1
AC power lead
×
1
FM/AM loop aerial
×
1
●
Refer to the operation manual for details.
●
P. OO indicates the reference page in the operation manual.
2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar)
Batteries are not included.
Batteries are not included.
3
Replace the battery cover.
2
Putting batteries into the remote control
(P. 8)
1
Remove the battery
cover.
cover.
2
Insert the batteries.
**XL-30H(SUK).QG
00.2.4, 4:43 PM
1
2
4
Connections
(P. 7-8)
1
Connect the AM and FM aerials.
2
Connect the speaker system.
3
Connect the AC power lead.
2
1
3
1
2
FM aerial
AM loop aerial
AC 230 V, 50 Hz
White line
Right speaker
Left speaker
**XL-30H(SUK).QG
00.2.4, 4:43 PM
2
3
6
Listening to a tape
(P. 14)
3
2
1
4
5
1
2
5
3
4
6
1
2
6
7
5
PUSH
CLOSE
CLOSE
3
7
CD EJECT
4
Label side up
1
Press the ON/STAND-BY button to turn
the power on.
the power on.
2
Press the FUNCTION button until “FM” or
“AM” appears.
“AM” appears.
3
Press the BAND button to select FM ST,
FM or AM.
FM or AM.
4
Press the TUNING (
X
or
W
) button to tune
into a station.
5
Adjust the VOLUME control.
1
Press the ON/STAND-BY button to turn
the power on.
the power on.
2
Press the FUNCTION button until “Cd” or
“no dISC” appears.
“no dISC” appears.
3
Press the
7
CD EJECT button to open
the CD compartment.
4
Place a CD on the spindle.
5
Close the CD compartment by pushing the
corner marked “PUSH CLOSE”.
corner marked “PUSH CLOSE”.
6
Press the
0
/CD
6
button.
7
Adjust the VOLUME control.
5
Listening to a CD
(P. 11)
Listening to the radio
(P. 15)
7
1
Press the ON/STAND-BY button to turn
the power on.
the power on.
2
Press the FUNCTION button until “TP”
appears.
appears.
3
Open the cassette door by pushing the
area marked “
area marked “
7
PUSH EJECT”
4
Load a cassette.
5
Press the
0
button.
6
Adjust the VOLUME control.
**XL-30H(SUK).QG
00.2.4, 4:43 PM
3
4
8
Recording from a CD
(P. 17)
1
Press the ON/STAND-BY button to turn
the power on.
2
Press the FUNCTION button until “Cd” or
“no dISC” appears.
3
Load a CD and a recordable cassette.
4
Press the REC PAUSE button.
5
Press the
0
button.
1
3
3
2,3
AC INPUT
●
Do not touch the laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
CD pickup cleaning
1
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
2
Unplug the AC power lead from the AC INPUT
socket on this unit.
socket on this unit.
3
Whilst pressing down the MEMORY/SET but-
ton and the
ton and the
0
button, plug the AC power lead
into the AC INPUT socket on this unit.
Caution:
●
The operation explained above will erase all data
●
Resetting the micro computer
TINSE0041SJZZ
A0002.YT
1
2
5
3
4
**XL-30H(SUK).QG
00.2.4, 4:43 PM
4
