XL-1100 - Sharp Audio User Guide / Operation Manual. Page 49

8

XL-UR2110H

XL-UR250H

XL-UR230H

Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
 

When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such problem occurs, do the following:
1

Set the unit to the stand-by mode and turn the power on again.

2

If the unit is not restored in the previous operation, unplug and
plug in the unit again, and then turn the power on.

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
 

1

Press the ON/STAND-BY button to enter the power stand-by
mode.

2

Whilst pressing down the   1 button and the   5 button, press
the ON/STAND-BY button until “CLEAR ALL” appears.

 
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.

The remote 
control does not 
operate.

Is the AC power lead of the unit plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Does the remote control sensor receive 
strong light?

The radio 
makes unusual 
noises continu-
ously.

Is the unit placed near the TV or computer?
Is the FM aerial or AM loop aerial placed 
properly? Move the aerial away from the 
AC power lead if it's located nearby.

Device cannot 
be detected.

Is there any MP3/WMA file available?
Is the device properly connected?
Is it MTP device?
Does the device contain AAC file only?

Playback does 
not start.

Is it the copyright protected WMA file?
Is it the false MP3 file?

Wrong time   
display.
Wrong file name 
display.

Is Variable Bitrate file being played back?

Is the File Name written in Chinese or 
Japanese characters?

Recording 
cannot start.

Is the USB device in write protect mode?
Is it a CD-WMA disc?
Is the device’s memory already full?