Read Sharp XL-1100 (serv.man5) Service Manual online
– 7 –
XL-1000H/1100H
Accessories
1
2
3
Battery installation of remote control
Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Batteries are not included.
Remove the
Insert the batteries
Replace the cover.
battery cover.
as shown.
1
1
2
2
Speaker wire
×
2
Remote control
×
1
AM loop aerial
×
1
FM aerial
×
1
AC power lead
×
1
(For Europe)
(For U.K.)
"AAA" size battery (UM-4,
R03, HP-16 or similar)
R03, HP-16 or similar)
×
2
(For Europe only)
System connections
3
3
Right speaker
Left speaker
Connection cable
for digital recording
(not supplied)
for digital recording
(not supplied)
MD recorder
To the optical line
input socket
input socket
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
To the line
output socket
output socket
RCA lead
(not supplied)
(not supplied)
AM loop aerial
VCR, DVD, etc.
TV
FM aerial
Headphones
Right speaker
Left speaker
Black
White line
(For Europe)
(For U.K.)
Listening to a CD
Total number of tracks
Turn on your system
4
4
Total playing time
Press the ON/STAND-BY button to turn the power on.
1
Press the FUNCTION button until “CD STOP” or “NO DISC” appears on
the display.
the display.
2
Press the
7
7
7
7
7
button to open the CD compartment.
3
Place a CD on the spindle, label side up.
4
Press the
7
7
7
7
7
button to close the CD compartment.
5
Press the
06
06
06
06
06
button to start playback from track 1.
12 cm (5")
8 cm (3")
■
If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the following:
2. If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the following:
¡
Press the ON/STAND-BY button to enter the power stand-by mode.
™
Unplug the AC power lead from the AC INPUT socket on the unit.
œ
Whilst pressing down the MEMORY/SET button and the
J
button, plug the AC power lead into the AC
INPUT socket on the unit.
■
Maintenance
Do not touch the laser pickup lens. If fingerprints or dust accumulate on
the pickup, clean it gently with a dry cotton swab.
the pickup, clean it gently with a dry cotton swab.
1
Press the FUNCTION button until “FM” or “AM” appears on the display.
2
Press the TUNING (
X
X
X
X
X
or
W
W
W
W
W
) button to tune in to the desired station.
When the TUNING button is pressed for more than 0.5 seconds, scanning will start auto-
matically and the tuner will stop at the first receivable broadcast station.
matically and the tuner will stop at the first receivable broadcast station.
3
To receive an FM stereo transmission:
Press the FUNCTION button to display the
“ST” indicator.
Press the FUNCTION button to display the
“ST” indicator.
●
“
j
” will appear when an FM broadcast is in stereo.
Listening to the radio
AC INPUT
FM stereo mode indicator
FM stereo receiving indicator
Click on the first or last page to see other XL-1100 (serv.man5) service manuals if exist.