WA-MP50HS - Sharp Audio User Guide / Operation Manual. Page 10

Read Sharp WA-MP50HS User Guide / Operation Manual online

7
05/5/23
     
WA-MP50_55H_UK.fm
WA-MP50_55H TINSEA063SJZZ
WA-MP50H
WA-MP55H
Prepara
ti
on f
o
Us
e
-U
s
in
g
 w
it
h
 t
h
alka
lin
e b
a
tt
er
y-
Using with the alkaline battery  
!
Inserting the battery  
Notes:
"
Do not replace the battery during operation.
"
Do not use a nickel-cadmium battery.
"
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due
to battery leakage.
"
Installing the battery incorrectly may cause the unit to
malfunction.
Battery removal:
Open the battery cover and pull the battery.
!
Checking the remaining amount of battery 
level
The battery level is shown by the battery indicator during
operation.
"
When the battery level is very low, the battery indicator
will flash. Replace the alkaline battery with a new one.
"
When the battery has run out completely, "Low Battery
Shut Down..." will appear. Then, the power will be dis-
connected automatically.
Notes:
"
The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
"
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
"
The battery life and the operating time may be short-
ened by usage conditions, long periods of disuse, etc.
1
Open the battery cover.
2
Insert the "AAA" size alkaline battery (LR03) into
the battery compartment.
3
Close the battery cover.
Do not force the battery 
cover open too far.
Insert 
the      side.
OPEN
03
Battery indicator
When the battery
level is high
When the battery
level is very low
Page of 52
Display

Click on the first or last page to see other WA-MP50HS service manuals if exist.