Read Sharp SD-SH111 (serv.man23) Service Manual online
SD-SH111
– 6 –
OPERATION MANUAL
Speaker connection
Front speaker
(right)
not supplied
(right)
not supplied
Front speaker
(left)
not supplied
(left)
not supplied
Surround speaker
(right)
not supplied
(right)
not supplied
Speaker wire
(not supplied)
(not supplied)
Speaker wire
(not supplied)
(not supplied)
Speaker wire
(not supplied)
(not supplied)
Speaker wire
(not supplied)
(not supplied)
Speaker wire
(not supplied)
(not supplied)
Speaker wire
(not supplied)
(not supplied)
Surround speaker
(left)
not supplied
(left)
not supplied
Center
speaker
not supplied
speaker
not supplied
Subwoofer
not supplied
not supplied
Setting the clock
By setting the unit on time, you can use it not only as a clock but also for timer play-
back.
back.
[Back]
In this example, the clock is set for 9:30 AM.
[When the power is on]
Press the TIMER button.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.
Caution:
Unplugging the unit or power failure will clear the clock setting.
Readjust the clock.
Readjust the clock.
To readjust the clock:
Perform "Setting the clock" from the beginning.
In step 2, "TIMER STANDBY" appears.
In step 3, press the or button to select "CLOCK", and the press the ENT but-
ton.
In step 3, press the or button to select "CLOCK", and the press the ENT but-
ton.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button.
3
Within 10 seconds, press the or button to select "ADJUST",
and then press the ENT button.
and then press the ENT button.
4
Press the or button to adjust the
hour and then press the ENT button.
hour and then press the ENT button.
"AM 12:00" is 12 o'clock midnight.
"PM 12:00" is 12 o'clock noon.
Press the or button once to advance the time by 1 hour. Hold it down to
advance continuously.
advance continuously.
The 12-hour display will appear.
"AM" will change to "PM" automatically.
5
Press the or button to adjust the
minutes and then press the ENT but-
ton.
minutes and then press the ENT but-
ton.
Press the or button once to advance the time by 1 minute. Hold it down
to advance continuously.
to advance continuously.
The hour will not advance even if minutes advance from "59" to "00".
The clock starts from "0" second. (Seconds are not displayed.)
To confirm the time display:
[When the unit is in the stand-by mode]
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control.
The time display will appear for about 5 seconds.
The time display will appear for about 5 seconds.
Click on the first or last page to see other SD-SH111 (serv.man23) service manuals if exist.