Read Sharp SD-PX15H (serv.man7) User Guide / Operation Manual online
E-62
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
F
S
V
I
N
P
E
D
SD-PX15H
Ad
v
a
nced
F
e
atures
- Conne
c
ting othe
r e
quipme
n
t -
"
Audio connection to TV
You can listen to TV sound from the speakers by connecting the unit using an optical
digital cable or audio cable (not supplied).
digital cable or audio cable (not supplied).
To listen to TV sound:
Turn the power on and press the TV button.
Each press of this button changes the input in the order of "AUTO" "DIGI-
TAL" "ANALOG".
Each press of this button changes the input in the order of "AUTO" "DIGI-
TAL" "ANALOG".
Notes:
!
Plug in each cable fully to prevent noise interference.
!
Refer to the manual for the connected equipment.
!
You can also use the FUNCTION button to set the input to TV.
"
Audio connection to VCR
You can listen to VCR sound from the speakers by connecting the unit using an audio
cable.
cable.
To listen to VCR sound:
Turn the power on and press the VCR button.
Notes:
!
The audio VCR output sockets sends signals coming from a DVD/CD, the tuner,
audio TV input sockets, digital audio input socket, and digital audio TV input
socket. Signals from the audio VCR input sockets are not sent.
audio TV input sockets, digital audio input socket, and digital audio TV input
socket. Signals from the audio VCR input sockets are not sent.
!
When sending signals coming from the digital audio input socket or digital audio
TV input socket via the audio VCR output sockets on the unit, set the stereo mode
to "STEREO" (see page 46). In the multi channel mode, signals may not be sent
properly. When sending signals from the digital audio input socket to the audio
VCR output sockets, the audio output level decreases. (Leave headphones
unplugged whilst recording to avoid further level decrease.)
TV input socket via the audio VCR output sockets on the unit, set the stereo mode
to "STEREO" (see page 46). In the multi channel mode, signals may not be sent
properly. When sending signals from the digital audio input socket to the audio
VCR output sockets, the audio output level decreases. (Leave headphones
unplugged whilst recording to avoid further level decrease.)
!
Plug in each cable fully to prevent noise interference.
!
Refer to the manual for the connected equipment.
!
You can also use the FUNCTION button to set the input to "VCR".
"
Audio connection to a digital tuner
You can listen to sound from the digital tuner, etc. from the speakers by connecting
the unit using an audio digital cable.
the unit using an audio digital cable.
To listen to the digital tuner:
Turn the power on and press the AUX button.
Notes:
!
You can also listen to the digital tuner sound by connecting the tuner to the digital
audio TV input socket. Set the input to TV in this case.
audio TV input socket. Set the input to TV in this case.
!
Plug in each cable fully to prevent noise interference.
!
Refer to the manual for the connected equipment.
!
You can also use the FUNCTION button to switch the input to auxiliary.
"
Using other subwoofer
You can connect a subwoofer with an amplifier to the subwoofer pre output socket.
Note:
No sound is heard from the speaker in which an amplifier is not built in.
"
Headphones
!
Before plugging in or unplugging the headphones, reduce the volume.
!
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohm and 50 ohm impedance. The recommended impedance is 32 ohms.
ohm and 50 ohm impedance. The recommended impedance is 32 ohms.
!
Whilst headphones are connected, sound is not produced from the speakers.
!
You cannot use the surround feature with headphones.
!
Do not plug in or unplug headphones whilst recording. The sound may skip.
AUTO:
The audio input switches automatically. (*)
DIGITAL:
The audio input is switched to digital.
ANALOG:
The audio input is switched to analogue.
(*)
When digital and analogue signals are received, the unit selects digital signals.
Click on the first or last page to see other SD-PX15H (serv.man7) service manuals if exist.