SD-PX15H (serv.man3). Preparation for use - Sharp Audio User Guide / Operation Manual. Page 7

Read Sharp SD-PX15H (serv.man3) User Guide / Operation Manual online

E-17
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Pr
epara
tion f
o
r Us
e
- Se
tting the
 c
loc
k
 -
Setting the clock
By setting the unit to the correct time, you can use it not only as a clock but also for
timer playback.
 
In this example, the clock is set to 9:30.
To confirm the time display:
[When the unit is in the stand-by mode]
Set the MODE 1/MODE 2 switch to MODE 1 and press the DISPLAY button.
The time display will appear for about 5 seconds.
[When the power is on]
Set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.
Within 10 seconds, press the   or   button to select "CLOCK".
The time display will appear for about 10 seconds.
To readjust the clock:
Perform "Setting the clock" from the beginning.
!
In step 2, the time will be displayed.
!
Follow steps 3 - 4.
 
Note:
Unplugging the unit or power failure will clear the clock setting.
Readjust the clock.
1
Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and
press the TIMER/SLEEP button.
2
Within 10 seconds, press the   or 
button to select "CLOCK ADJUST",
and then press the ENTER button. 
3
Press the   or   button to adjust the
hour and then press the ENTER but-
ton.
!
Press the   or   button once to advance the time by 1 hour. Hold it down to 
advance continuously.
!
The 24-hour display will appear.
4
Press the   or   button to adjust the
minutes and then press the ENTER
button.
!
Press the   or   button once to advance the time by 1 minute. Hold it down 
to advance continuously.
!
The hour will not advance even if minutes advance from "59" to "00".
!
The clock starts from "0" second (seconds are not displayed).
!
The time disappears after approx. 2 seconds.
Page of 8
Display

Click on the first or last page to see other SD-PX15H (serv.man3) service manuals if exist.