Read Sharp SD-PX15H (serv.man3) User Guide / Operation Manual online
E-13
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Pr
epara
tion f
o
r Us
e
- S
p
e
a
k
e
r c
onne
c
tion
-
Speaker connection (continued)
"
Connecting speaker wires
To prevent accidental short circuits between and terminals, connect the
speaker wires to the speakers first and then to the unit.
speaker wires to the speakers first and then to the unit.
!
Do not pinch the speaker wires when attaching the speaker terminal cover.
!
When the centre and surround speakers are not connected, set the speaker size
to "C-NO" and "S-NO". Otherwise, the protection circuit may be activated and the
power is turned off.
to "C-NO" and "S-NO". Otherwise, the protection circuit may be activated and the
power is turned off.
"
Speaker stand
The front speakers and surround speakers support the optional floor speaker stand
(see page 64). For installation, see the manual.
(see page 64). For installation, see the manual.
Note:
Keep the removed speaker terminal covers, speaker stands, or screw in a safe place.
Make sure to leave the AC power lead disconnected when connecting the
speakers.
speakers.
1
Remove the speaker terminal cover.
Example:
To connect the left surround speaker
To connect the left surround speaker
If screws are difficult to turn by hand, use a coin or flathead screwdriver ( ).
2
Connect the wires to the speakers.
Label (blue)
Turn it over and
route the cable
through a hole.
route the cable
through a hole.
Unscrew the
cover to remove.
cover to remove.
Red
Red
Black
Black
Speaker terminal (blue)
Tube (blue)
Tube (blue)
Connect the other end to the main unit.
Attach the speaker terminal cover.
3
4
Label (blue)
Caution:
!
The supplied speaker designed exclusively for SD-PX15H. Do not connect
speakers for SD-PX15H to other equipment. Also, do not connect other
speakers to SD-PX15H. It may cause malfunction.
speakers for SD-PX15H to other equipment. Also, do not connect other
speakers to SD-PX15H. It may cause malfunction.
!
Do not mistake the and , and right and left terminals of the speaker wires. (The
right speaker is placed on the right when you face the unit.)
right speaker is placed on the right when you face the unit.)
!
Do not let the bare speaker wires touch each other.
!
Do not stand or sit on the speakers. You may be injured.
!
Do not short-circuit the speaker wires. If the power is
turned on, malfunction may occur.
turned on, malfunction may occur.
!
When disconnecting the speaker wires, unplug the AC
power lead, and then disconnect the speaker wires from
the main unit.
power lead, and then disconnect the speaker wires from
the main unit.
Click on the first or last page to see other SD-PX15H (serv.man3) service manuals if exist.