SD-NX10 - Sharp Audio User Guide / Operation Manual. Page 6

NX10H_UK02-12.fm

00/12/17

The voltage used must be the same as that specified on this unit. Using this prod-
uct with a higher voltage other than that which is specified is dangerous and may
result in a fire or other type of accident causing damage. SHARP will not be held
responsible for any damage resulting from use of this unit with a voltage other than
that which is specified.

 

This product is equipped with a cooling fan on the back of the amplifier for better
heat radiation.

 
 

The sound level at a given volume setting depends on speaker efficiency, location,
and various other factors. It is advisable to avoid exposure to high volume levels,
which occurs whilst turning the unit on with the volume control setting up high, or
whilst continually listening at high volumes.
 
 
 

Compact discs are fairly resistant to damage, however mistracking can occur due to an
accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoy-
ment from your CD collection and player.

Do not write on either side of the disc, particularly the non-label side from which signals
are read. Do not mark this surface.

Keep your discs away from direct sunlight, heat, and excessive moisture.

Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause
noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry
cloth, wiping straight out from the centre, along the radius.

 
Please confirm that the following accessories are included.

Note:
Only the above accessories are included.

Do not attach labels or adhesive tapes on the CD. It may 
cause malfunction to the unit.

Remote control   1

"AA" size batteries (UM/SUM-3, R6, HP-

7 or similar)  2

AM loop aerial   1

FM aerial   1

Speaker wire   2

AC power lead   1

System connection lead   1

Sound connection lead   1

Soft cloth   1

Web-site: www.sharp.co.uk/support   Help Line: 08705 274277 (office hours)