Read Sharp SD-AT50H (serv.man18) Service Manual online
SD-AT50H
– 8 –
Figure 8-1
Figure 8-2
Subwoofer
(J1)x4
ø
4x16mm
Subwoofer
Box
Box
Screwdriver
Front
Panel
Panel
Subwoofer
Box
Box
(Note 1)
Wrap a slotted screwdriver with a waste cloth, etc. and insert
it into the gap to remove the front panel. Take great care not
to damage the subwoofer box.
Wrap a slotted screwdriver with a waste cloth, etc. and insert
it into the gap to remove the front panel. Take great care not
to damage the subwoofer box.
ADDITIONAL DESCRIPTION
Disassembling the top cabinet and bottom cabinet
Remove the 5 screws on the backside of the top cabinet. Raise the rear end by approx. 10 mm, the hooks of the front panel and
then move it backward by approx. 5 mm. Pushing the top of the front panel to separate from keep the top cabinet horizontal and
raise it right above to remove.
Remove the 4 cushions and the 4 screws. On the bottom cabinet push down around the center of the bottom cabinet with a steel
measure or like to remove the tab. Slide the bottom cabinet right backward to remove.
Remove the 5 screws on the backside of the top cabinet. Raise the rear end by approx. 10 mm, the hooks of the front panel and
then move it backward by approx. 5 mm. Pushing the top of the front panel to separate from keep the top cabinet horizontal and
raise it right above to remove.
Remove the 4 cushions and the 4 screws. On the bottom cabinet push down around the center of the bottom cabinet with a steel
measure or like to remove the tab. Slide the bottom cabinet right backward to remove.
Insert a steel measure and push down the bottom
cabinet to detach the hook.
cabinet to detach the hook.
The top cabinet is removed
Click on the first or last page to see other SD-AT50H (serv.man18) service manuals if exist.