Read Sharp SD-AT100 (serv.man7) Service Manual online
SD-AT100H
– 8 –
OPERATION MANUAL
Speaker connection
Front speaker
(right)
(right)
Front speaker
(left)
(left)
Surround speaker
(right)
(right)
Black
Blue
Blue
Red
Black
White
White
Red
Black
Red
Black
Red
Red
Red
Green
Green
Purple
Grey
Grey
Surround speaker
(left)
(left)
Centre
speaker
speaker
Subwoofer
You can connect
separately available
woofer to enjoy more
of the bass sound.
separately available
woofer to enjoy more
of the bass sound.
Black
Red
Purple
Black
Red
Setting the clock
By setting the unit on time, you can use it not only as a clock but also for timer play-
back.
back.
[Back]
In this example, the clock is set for 9:30.
To confirm the time display:
[When the unit is in the stand-by mode]
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control.
The time display will appear for about 5 seconds.
The time display will appear for about 5 seconds.
[When the power is on]
Press the TIMER button.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.
Caution:
Unplugging the unit or power failure will clear the clock setting.
Readjust the clock.
Readjust the clock.
To readjust the clock:
Perform "Setting the clock" from the beginning.
In step 2, "TIMER STANDBY" appears.
In step 3, press the or button to select "CLOCK", and the press the ENT but-
ton.
In step 3, press the or button to select "CLOCK", and the press the ENT but-
ton.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button.
3
Within 10 seconds, press the or button to select "ADJUST",
and then press the ENT button.
and then press the ENT button.
4
Press the or button to adjust the hour
and then press the ENT button.
and then press the ENT button.
Press the or button once to advance the time by 1 hour. Hold it down to ad-
vance continuously.
vance continuously.
5
Press the or button to adjust the min-
utes and then press the ENT button.
utes and then press the ENT button.
Press the or button once to advance the time by 1 minute. Hold it down
to advance continuously.
to advance continuously.
The hour will not advance even if minutes advance from "59" to "00".
The clock starts from "0" second. (Seconds are not displayed.)
Click on the first or last page to see other SD-AT100 (serv.man7) service manuals if exist.