Read Sharp SD-AT100 (serv.man2) Service Manual online
– 19 –
SD-AT100H
REMOVING AND REINSTALLING THE MAIN PARTS
Figure 19-1
Figure 19-2
Figure 19-4
How to Remove the DVD/CD lid motor
(See Fig. 19-1 and 19-2)
(See Fig. 19-1 and 19-2)
1. Remove the front panel.
(Refer to the disassembly method on pages 15 and 16.)
2. Remove the screws (A1) x 5 pcs.
3. Remove the CD lid gear unit from the front panel.
4. Remove the screws (A2) x 2 pcs. to remove the CD lid
3. Remove the CD lid gear unit from the front panel.
4. Remove the screws (A2) x 2 pcs. to remove the CD lid
motor.
Caution:
Be careful not to damage the gear.
(If the gear is damaged, noise is heard when searching.)
Be careful not to damage the gear.
(If the gear is damaged, noise is heard when searching.)
(A2)x2
ø2x4mm
ø2x4mm
DVD/CD Lid
Motor
Motor
Gear Box Ass'y
Gear Box Ass'y
DVD/CD Lid
Panel
Panel
(A1)x5
ø3x10mm
ø3x10mm
WIRING PROCESS DIAGRAM
1-BIT SECTION
Fix the wires with nylon bands as shown.
Click on the first or last page to see other SD-AT100 (serv.man2) service manuals if exist.