Read Sharp QT-CD180 User Guide / Operation Manual online
6
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
To fast forward audibly (Cue):
During playback, hold down the CUE/UP
4
button.
To fast reverse audibly (Review):
During playback, hold down the REVIEW/DOWN
5
button.
Notes:
●
When the end of the disc is reached whilst cueing, “En” will appear in
the display and CD operation is paused. Press the REVIEW/DOWN
the display and CD operation is paused. Press the REVIEW/DOWN
5
button for fast reverse or press the STOP
■
button to stop CD
operation.
●
If the beginning of the disc is reached whilst reviewing, the mode will
automatically switch to normal playback at that point.
automatically switch to normal playback at that point.
■
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking can
occur due to an accumulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoyment from your CD col-
lection and player.
occur due to an accumulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoyment from your CD col-
lection and player.
●
Do not write on either side of the disc, particularly the non-label side.
Signals are read from the non-label side. Do not mark this surface.
Signals are read from the non-label side. Do not mark this surface.
●
Keep your discs away from direct sunlight, heat, and excessive mois-
ture.
ture.
●
Always hold the CDs by the edges. Fingerprints, dirt, or water on the
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
centre, along the radius.
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
centre, along the radius.
1
Set the FUNCTION switch to FM or AM.
2
Turn the TUNING control to tune in to the desired station.
During FM stereo reception, it automatically switches to monaural
when the signal is weak.
when the signal is weak.
Aerial adjustment:
After use:
Set the FUNCTION switch to STAND-BY.
Set the FUNCTION switch to STAND-BY.
Listening to the Radio
FM
AM
Listening to a CD (Continued)
Click on the first or last page to see other QT-CD180 service manuals if exist.