Read Sharp QT-CD180 (serv.man3) Service Manual online
QT-CD180H/QT-CD180W
– 8 –
1
Rear Cabinet
1. Screw ................... (A1) x4
8-1
2. Socket .................. (A2) x1
2
Front Cabinet
1. Open the cassette holder
8-2
2. Socket .................. (B1) x1
3. Screw ................... (B2) x4
4. Screw ................... (B3) x2
3. Screw ................... (B2) x4
4. Screw ................... (B3) x2
3
Main PWB (With
1. Knob ..................... (C1) x1
8-3
CD Control PWB/ 2. Socket .................. (C2) x3
X-BASS PWB/
X-BASS PWB/
3. Screw ................... (C3) x5
Headphones
4. Screw ................... (C4) x1
PWB) (Note)
5. Socket .................. (C5) x1
4
Headphones PWB 1. Screw ................... (D1) x1
8-3
5
Tape Mechanism
1. Screw ................... (E1) x2
8-3
6
CD Control PWB
1. Screw ................... (F1) x2
8-4
(With Main PWB)
2. Bracket ................. (F2) x2
7
CD Mechanism
1. Screw ................... (G1) x3
8-4
8
Power PWB
1. Battery Lid ............ (H1) x1
8-5
2. Screw ................... (H2) x1
(For QT-CD180H)
2. Screw ................... (H2) x2
(For QT-CD180W)
3. Bracket ................. (H3) x1
4. Hook ..................... (H4) x1
(For QT-CD180H)
2. Screw ................... (H2) x2
(For QT-CD180W)
3. Bracket ................. (H3) x1
4. Hook ..................... (H4) x1
9
Beat Cancel PWB 1. Screw .................... (J1) x1
8-5
(QT-CD180W Only) 2. Socket ................... (J2) x1
DISASSEMBLY
STEP
REMOVAL
PROCEDURE
FIGURE
Figure 8-3
Figure 8-1
Figure 8-2
Figure 8-5
Figure 8-4
Note:
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector remove to protect the optical pickup
from electrostatic damage.
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector remove to protect the optical pickup
from electrostatic damage.
(B3)x1
ø3x8mm
ø3x8mm
(B2)x4
ø3x10mm
ø3x10mm
(B3)x1
ø3x8mm
ø3x8mm
Tape Mechanism
Front
Cabinet
Cabinet
Main
PWB
PWB
Open
Cassette
Holder
(B1)x1
(G1)x3
ø2.5x10mm
ø2.5x10mm
CD Mechanism
CD Control
PWB
PWB
Top Cabinet
PWB
Washer x3
Washer x3
(F1)x2
ø3x10mm
ø3x10mm
(F2)x1
(F2)x1
Caution on Disassembly
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep it safe and ensure excellent
performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep it safe and ensure excellent
performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need
to be removed when disassembling the unit. After
servicing the unit, be sure to rearrange the leads
where they were before disassembling.
servicing the unit, be sure to rearrange the leads
where they were before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
(C3)x5
ø3x10mm
(E1)x2
ø3x10mm
ø3x10mm
(C4)x1
ø2.5x10mm
ø2.5x10mm
(C2)x2
(C1)x1
Volume PWB
Tape
Mechanism
Mechanism
CD
Mechanism
Mechanism
CD Motor
PWB
PWB
Main PWB
Top
Cabinet
Cabinet
(C5)x1
(D1)x1
ø3x10mm
X-BASS
PWB
PWB
Headphones
PWB
PWB
(C2)x1
Front Cabinet
Rear Cabinet
Top Cabinet
(A1)x4
ø3x14mm
ø3x14mm
Main PWB
(A2)x1
(H2)x1
ø3x10mm
ø3x10mm
Rear Cabinet
Power PWB
Beat Cancel PWB
Driver
(H4)x1
(H1)x1
(H3)x1
(J1)x1
ø3x8mm
ø3x8mm
Power
PWB
PWB
(H2)x2
ø3x12mm
ø3x12mm
(H3)x1
Voltage
Selector
Selector
QT-CD180W
Only
Only
For QT-CD180H
For QT-CD180W
QT-CD180W
Only
Only
(J2)x1
Click on the first or last page to see other QT-CD180 (serv.man3) service manuals if exist.