Read Sharp QT-CD132H Service Manual online
QT-CD131H/132H
– 3 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
TO THE OPERATION MANUAL.
SPECIFICATIONS
General
Power source:
AC 230 - 240V, 50 Hz
DC 12 V [ "D" size (UM/SUM-1,
R20 or HP-2) battery x 8]
DC 3 V ["AA" size (UM/SUM-3, R6 or
HP-7) battery x 2 for tuner memory]
DC 12 V [ "D" size (UM/SUM-1,
R20 or HP-2) battery x 8]
DC 3 V ["AA" size (UM/SUM-3, R6 or
HP-7) battery x 2 for tuner memory]
Power consumption: 11 W
Output power:
Output power:
PMPO; 28 W (total)
(131H Except for UK/ MPO; 8.4 W (4.2 W + 4.2 W)
132H)
132H)
(AC operation, DIN 45 324)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, DIN 45 324)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, DIN 45 324)
Output power:
MPO (Max.); 8.4W (4.2 W + 4.2 W)
(131H For UK)
(AC operation)
RMS; 4.6 W (2.3 W +2.3 W)
(DC operation, 10 % T.H.D.)
RMS; 4.6 W (2.3 W +2.3 W)
(DC operation, 10 % T.H.D.)
Speakers:
10 cm(4" ) full-range speaker x 2
Output terminals:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Weight:
3.2 kg (7.1 Ibs.) without batteries
Radio
Frequency range:
FM; 87.5 - 108 MHz
AM; 522 - 1,620 kHz
AM; 522 - 1,620 kHz
Tape recorder
Frequency response: 50 - 14,000 Hz (Normal tape)
Signal/noise ratio:
Signal/noise ratio:
50 dB
Wow and flitter:
0.3 % (DIN 45 511)
(131H Except for UK/132H)
Wow and flitter:
Wow and flitter:
0.25 % (WRMS)
(131H For UK)
Motor:
Motor:
DC 12 V electric governor
Bias system:
AC bias
Erase system:
Magnet erase
Compact disc player
Disc:
Compact disc
Signal readout:
Non-contact, 3-beam semiconductor
laser pickup
laser pickup
Audio channels:
2
Quantization:
16-bit linear quantization
Filter:
4-tims oversampling digital filter
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
Specifications for this model are subject to change without
prior notice.
prior notice.
IMPORTANT SERVICE NOTES (131H FOR UK ONLY)
Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
Set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzor sounds.
NG: The “NG” lamp lights and the buzzor sounds.
PROBE
AC
OUT
UNIT
SHORT-CIRCUT
AC POWER
SUPPLY CORD
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND OF BATTERY
SPRING
TO GND OF BATTERY
SPRING
WITHSTANDING
VOLTAGE TESTER
Click on the first or last page to see other QT-CD132H service manuals if exist.