Read Sharp QT-CD111H User Guide / Operation Manual online
<P=003>
Recording from the CD
Recording from the radio
1
Set the FUNCTION
switch to CD.
switch to CD.
●
Load the disc to be re-
corded.
corded.
2
Load a blank cassette
into the cassette com-
partment.
into the cassette com-
partment.
3
P ress t he
RECORD
button.
RECORD
button.
4
Press the
PLAY/REPEAT
button on the
CD.
PLAY/REPEAT
button on the
CD.
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
STOP/EJECT
RECORD
PLAY /
REPEAT
To stop recording:
Press the STOP/EJECT button.
Note:
●
If the STOP button on the CD player is pressed
whilst recording, or if the CD comes to its end,
the tape deck will not stop.
whilst recording, or if the CD comes to its end,
the tape deck will not stop.
To record a specific track:
Press the UP or DOWN button on the CD player until
the desired track number is displayed, then start
recording.
Press the UP or DOWN button on the CD player until
the desired track number is displayed, then start
recording.
Before recording:
●
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
make a preliminary test to ensure that the desired
material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME and X-BASS controls may be
adjusted with no effect to the recorded signal.
(Variable Sound Monitor)
adjusted with no effect to the recorded signal.
(Variable Sound Monitor)
●
Metal and CrO
2
tapes cannot be used for recor-
ding.
1
Set the
F U N C T I O N
switch to AM
or FM AUTO.
F U N C T I O N
switch to AM
or FM AUTO.
●
Tune in to the
station to be re-
corded.
station to be re-
corded.
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
STOP/EJECT
PAUSE
2
Load a blank cas-
sette into the cas-
sette compartment.
sette into the cas-
sette compartment.
3
Press the
PAUSE
button.
PAUSE
button.
4
Press the
RECORD
button.
RECORD
button.
5
P r es s t he
PAUSE but-
ton again.
PAUSE but-
ton again.
RECORD
PAUSE
To erase a recorded tape:
1
Set the FUNCTION switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
compartment.
3
Press the RECORD button.
QT-CD111H(SUK) TINSE0002SJZZ
6
Click on the first or last page to see other QT-CD111H service manuals if exist.