Read Sharp HT-SL75 (serv.man4) Technical Bulletin online
AUD 2013 06 02
Date of Issue: 30
th
April 2013
Classification:
White
AUDIO TECHNICAL BULLETIN
Page 3 of 4
Sharp Electronics (UK) Limited
Reference
– TSI-1270006
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
REFLASH SOFTWARE FOR HDMI PWB
1. Connect the main software writer and the HDMI writer jig as below
.
2. Make sure the slide switch is set to J3 so that RED LED is lit.
3. AC OFF the main unit first before proceed next step.
4. Run below software (EPFlash.exe).
3. AC OFF the main unit first before proceed next step.
4. Run below software (EPFlash.exe).
- make sure PORT is correct (detach and attach back the USB cable if required).
- click OPEN FILE and load HDMI firmware.
- click OPEN FILE and load HDMI firmware.
5.
AC ON the main unit, then click "START".
( If any error occurs, turn AC OFF and AC ON back, then click "START" again.)
( If any error occurs, turn AC OFF and AC ON back, then click "START" again.)
Click on the first or last page to see other HT-SL75 (serv.man4) service manuals if exist.